LASERTEC 30 SLM 2nd Gen.​​​​​​​

Additive Manufacturing by selective laser melting (SLM)

Build volume X
11.8 in.
Build volume Y
11.8 in.
Build volume Z
11.8 in.
Min. Layer thickness
0.0008 in.
Min. Focus diameter
0.0028 in.
Laser power standard
600 W
Control & software alternatives
CELOS/RDesigner
Highlights

Additive Manufacturing by selective laser melting (SLM) in powder bed

  • Highly complex components with function integration
  • Internal close-contoured cooling channels
  • Weight optimisation due to lattice and honeycomb structures as well as topology-optimised components
  • Simultaneous build-up of different designs
  • Functional prototypes made of series materials 

Additive Manufacturing with a 11.8 x 11.8 x 11.8 in. (X / Y / Z) building volume

  • High precision building of 3D parts with dynamic adjustment of the focus diameter (1.8 µin - 5.1 µin) and layer thicknesses between 0.5 µin and 2.5 µin for maximum productivity
  • Application-specific fibre laser sources from 600 W as standard to 1.3 hp. optional
  • Optimised shield gas volume flow for highest component quality with minimum Argon consumption < 19 gl / hour
  • Open system: Individual adjustment of all machine settings and process parameters as well as unrestricted selection of the material supplier
  • End-to-end competence with integral process understanding from drawing to finished part: DMG MORI Process Chains for pre- and post-processing of additively built parts

rePLUG – The powder module for fast material change

  • Automated powder handling: Integrated powder-recycling for maximum efficiency and highest work-safety due to closed material cycle 
  • One material per rePLUG – Any expansion of the material range due to modular changing system
  • Contamination-free change between different materials in <2 hours
  • High process autonomy due to powerful duo filter system (filter change without process interruption) as well as large powder reservoir (no manual refilling required in the process)
  • Optional: rePLUG RESEARCH The additional powder module, especially developed for the material and process parameter development on the series system 

ADDITIVE MANUFACTURING

Sample applications
Control & software

NEW: OPTOMET - First time right Parameter Optimization Software

  • Expert knowledge at your finger tips - Parameter development for NEW materials within minutes
  • 20% less material costs - Increased usage of recycled powder without any loss of quality 

  • Fully adaptable material properties and layer thicknesses 

  • rePLUG reSEARCH and OPTOMET - The combination for material development 

CELOS: Consistent software solution from CAM programming up to machine control

  • Intuitive machine operation due to touchscreen and APP-based control
  • RDesigner: CAM Programming directly on the machine control
  • HEAT-Calculation: Patented advance calculation of mass distribution and automatical adjustment of all laser parameters for top component quality
  • Monitoring tools: Camera-based process monitoring of the build-up and coating quality
Service & training
Downloads & Technical Data
Technical Data
Build volume X
11.8 in.
Build volume Y
11.8 in.
Build volume Z
11.8 in.
Min. Layer thickness
0.0008 in.
Max. Layer thickness
0.0039 in.
Min. Focus diameter
0.0028 in.
Max. Focus diameter
0.0079 in.
Laser power standard
600 W
Laser power optional
1000 W
Inert gas
Argon
Inert gas consumption
70 l/h

DMG MORI uses cookies to ensure you the best experience on our website. When you browse the website you agree to our use of cookies. More information on data protection and  revocationTerms and ConditionsImprintExclusion of liability