Counter spindle tip
- Perfect combination of 6-sided complete machining and tailstock function
- Automatically load and unload a tailstock centre into the chuck of the main spindle or counter spindle via the milling spindle and into the mgazine
- Support of long and slender workpieces on the main spindle thanks to the synchronous counter spindle tip
Highlights
Customer Benefits
- Higher component accuracy due to automatic change without opening the door (heat flow constant)
- Position-locking the spindle with the tip leads to increased process safety
Left : Automatic changed centering tip. / Right : Parameter Input Mask: Control Cleaning, changing tip and control coolant
Downloads
Downloads
Technical Data
product-technical data
Machines
CLX*
CTX*
NLX*
CLX TC
CTX TC
CTX TC 4A
NTX*
SPRINT 50 / 65*
NZX*
CTX 4A*
ALX*
Controls
CELOS with SIEMENS
CELOS with MAPPS
● available
SPRINT 50
4-axis production turning with 3 Y-axes, B-axis and 3 turrets for up to 36 driven tools for max diameter 2.6 in.
Max. workpiece diameter
5.5 in.
Max. workpiece length
9.3 in.
Max. bar diameter
2 in.
Max. X-axis travel
6.5 in.
Max. Y-axis travel
2.8 in.
Max. Z-axis travel
9.3 in.
Control & software alternatives
SIEMENS
Highlights
Automatic turning with both collet and chuck application
- Main and counter spindle with 7,000 rpm, 55.3 ft lb, 21.5 hp (nominal)
- SIEMENS models are 2 turrets twin concept, 3 turrets, and 3 turrets plus B-axis
- FANUC model is 2 turrets
Up to 36 tool stations
- Total of 12 VDI 25 tool stations with Trifix per turret, each can be driven.
- Driven tools spindles up to 8,000 rpm, 7.4 ft lb, 2 hp (nominal)
- B-axis with torque motor and direct measuring system
FANUC and SIEMENS ERGOline Full-HD touchscreen 21,5” with CELOS
- CELOS APPs facilitate the consistent management, documentation and visualization of order, process and machine data
- Up to 10 linear axes, 1 B-axis and 2 C-axes
- Fanuc version with MAPPS V
Highly dynamic drivers in all axes for fast machining and minimal idle time
- 100% production optimized design
- Free chip fall due to vertical machine bed, no temperature influence
- Thermostable and self rigid machine bed with 3-point-support
- Machining of longer workpieces with two turrets and the patented TWIN design
- Highest accuracy due to water-cooled main and counter spindle
SPRINT 65
4-axis production turning with 3 Y-axes, B-axis and 3 turrets for up to 36 driven tools for max diameter 3.7 in.
Max. workpiece diameter
6.9 in.
Max. workpiece length
16.5 in.
Max. bar diameter
2.6 in.
Max. X-axis travel
6.5 in.
Max. Y-axis travel
3.1 in.
Max. Z-axis travel
16.5 in.
Control & software alternatives
SIEMENS
Fanuc
Highlights
Automatic turning with both collet and chuck application
- Main spindle with 5,000 rpm, 110.6 ft lb., 29.5 hp (nominal)
- Counter spindle with 5,000 rpm, 63.4 ft lb, 24.1 hp (nominal)
- SIEMENS models are 2 turrets twin concept, 3 turrets, and 3 turrets plus B-axis
- FANUC model is 3 turrets
Up to 36 tool stations
- Total of 12 VDI 30 tool stations with Trifix per turret, each can be driven.
- Driven tools spindles up to 12,000 rpm, 8.9 ft lb, 8.7 hp (nominal)
- B-axis with torque motor and direct measuring system
FANUC and SIEMENS ERGOline Full-HD touchscreen 21,5” with CELOS
- CELOS APPs facilitate the consistent management, documentation and visualization of order, process and machine data
- Up to 10 linear axes, 1 B-axis and 2 C-axes
- Fanuc version with MAPPS V
Highly dynamic drivers in all axes for fast machining and minimal idle time
- 100% production optimized design
- Free chip fall due to vertical machine bed, no temperature influence
- Thermostable and self rigid machine bed with 3-point-support
- Machining of longer workpieces with two turrets and the patented TWIN design
- Highest accuracy due to water-cooled main and counter spindle