The entry-level flexible pallet storage solution for up to 4 machines

• Handling of workpieces up to ø 2,000 x 1,600 mm, 3,000 kg
• Up to 11 pallets and max. four machines with two setup stations
• Operate via machine HMI or via the DMGMORI master computer HMI
• MCC-TMS tool management system

GX 3 / 5 / 7 / 15 // GX 5 / 10 T - Modular gantry loader system for one or more machines

• Highly productive and flexible workpiece handling for one machine or linking several machines 
• GX 10 T: Handling of workpieces up to ø 200 x 150 mm and and weighing up to 10 kg
• Combinable with various kinds of automatic peripheral equipment (washing, measuring, marking, etc.) and grippers of flexible design available
• Easy programming and setup due to integration into the machine control
• Load status monitoring available via DMG MORI Messenger

Highly flexible and collaborative automation for workpieces up to 5 kg

• Freely movable workpiece handling, incl. robot and storage area on a trolley 
• Workpieces up to 5 kg, or 2 × 2 kg with double gripper
• No infrastructure changes
• No safety fence necessary
• 600 × 900 mm footprint
• Collaborative robots, setup time <5 minutes 
• Direct teaching without robot knowledge
• Easy connection via Ethernet
• Expansion (option) 
• Storage for up to 108 workpieces (2-position storage for max. 36 workpieces as standard)
• Blow-off device
• Measuring system and quality check

Flexible gantry loader for WASINO machines

• Flexible gantry loader for WASINO machines
• Handling of workpieces up to ø 80 × 50 mm and weighing up to 1 kg
• Compact, space saving with fully included automation
• Combinable with various kinds of automatic peripheral equipment (washing, measuring marking etc.) and grippers of flexible design available
• Easy programming and setup due to integration into the machine control
• Load status monitoring available via DMG MORI Messenger

Flexible modular robot system for ≥ 1 machine

• Modular concept with standardized peripheral devices, e. g. washing, measuring or marking
• 80 % shorter setup time due to modular and standardized peripherals and robot programs
• Flexible adaptation to system changes including after installation
• Simple and easy operation via the MATRIS control system without programming

RPS 5 / 14 / 21 - Machine-integrated automation with minimum space requirement

• Unmanned shifts due to circular storage system with up to 21 pallets
• Handling of workpieces up to ø 800 × 1,000 mm, 700 kg max
• Space saving automation solution for one machining center with 400 or 500 mm square pallets
• Reduction of non-productive time due to loading and unloading during production 
• Easy operation via machine control with intuitive, integrated Pallet Manager software

Pallet changer with large storage capacity and small footprint

• Pallet changer with large storage capacity and small footprint
• Pallet handling with up to 114 positions in a footprint of less than 4 m²
• Workpieces up to ø 350 mm, 300 mm in length, 80 kg
• Simple programming and set-up by means of integration into the machine control system

Advanced pallet storage solution for up to 8 machines and 99 pallets

• Handling of workpieces up to ø 3,400 x 2,000 mm, 10,000 kg
• Very flexible pallet pool system with up to 8 machines, 99 pallets and 5 setup stations
• Handling of up to three different pallet sizes possible in one system (2 sizes for machine pallets and one size for material pallets)
• Control directly via DMG MORI master computer software LPS
• Integration into customer network / workflow possible
• Monitoring and management tools for all relevant areas (planning, workpieces, clamping, tools, etc.)
• Tool management system MCC-TMS