DMU 600 P (FD)
Universal machine in XXL size for 5-side / 5-axis machining of large workpieces
Max. X-axis travel
738.2 in.
Max. Y-axis travel
189 in.
Max. Z-axis travel
137.8 in.
Max. workpiece diameter
126 in.
Max. workpiece height
98.4 in.
Max. workpiece weight
176369.8 lbs.
Max. workpiece length
738.2 in.
Max. workpiece width
118.1 in.
Control & software alternatives
SIEMENS
HEIDENHAIN
Highlights
Precision
- Maximum stiffness and high temperature stability
- All relevant heat sources are liquid-cooled
- Optimized machine concept based on FEM and modal analysis in portal design
Performance
- Also available in mill- /turn - version
- Large working area for work pieces up to 236.2 in x 118.1 in and 55,116 (88,185) lb
- Main drive with 71.1 hp and 1,065.8 ft lb torque, optional 80.5 hp and 1,844 ft lb torque
- Changeable heads with B-axis kinematics for gear spindle and C-/A- and C-/B-axis kinematics for motor spindle
Efficiency
- Energy-efficient coolant units
- Optional connection to on-site / customer-site cooling circuit
- Version with double table and multi table available.
Maximum rigidity
- Shortest installation times through modular design of individual assembly groups
- Gear rod drive in the X-/ Y-axis
- Ball screw drive in Z-/ W-axis for highest dynamics
- Machine bed, column and crossbeam from EN-GJS-600-3 with excellent damping characteristics
- Large dimensions with high temperature stability
Sample applications
Control & software
TCC – Tool Control Center
- Chip detection on plan pad and tool cone
- Monitoring of pull-in force
- Cutting edge control in process by symmetry monitoring of the bending moment per cutting edge
- Visualization of the bending moment over time via Graph
Highlights
Customer Benefits
- Tool and workpiece protection
- Optimized tool process
- Monitoring of the radial and axial spindle load depending on the actual pull-in force
Left: NEW; Middle: Wear; Right: Cutting edge break
Flat Grinding
- Technology integration flat grinding on standard machines for best surface results
- Possibility of straightness compensation by definition of calibration points
- Acoustic emission sensor assisted approaching cycle
- ECS nozzle unit for best possible flushing of the grinding gap optionally available
Highlights
Customer Benefits
Machining strategies
- Easy programming with the integrated input parameters
- Complete machining with one setup
Optional rotating dressing unit incl. dressing cycles
Tilted Measuring Cycle
- Measuring with tilted tool axis
- Dialog-guided programming of the measuring cycles
- Positioning of the measuring points with rotary axis
Highlights
Customer Benefits
- Increase in component accuracy
- Reduction of set-up time
- Collision-free measuring thanks to tilted tool axis possible
- Further processing of the measurement results
Left : 1. circumferential measurement, 2. alignment surface, 3. alignment hole / Right : Dialog-guided programming
Maintenance Package i4.0
- Automatic recognition of tool pull-in force for consistently high process stability.
- Predefined cycle for automatic lubrication, every 75h or after 20,000 tool changes.
- Detection of leakage and measuring of usage of pneumatics system.
Highlights
Customer Benefits
- Efficient and timesaving lubrication without operator intervention
- High transparency by displaying the lubrication cycles and the current pull-in force.
- Data recording in combination with the optionally available Condition Analyzer for additional analyzes of air consumption and changes of the pull-in force
Detection of leakage and measuring of usage of pneumatics system.
Simple query of the monitoring parameters and the current pull-in force.
Profile Dressing
- Dressing of a profile on the grinding wheel by means of driven profile rollers (negative)
- Full utilisation of AE sensor and integrated dressing strategies
- High time saving as well as high dressing accuracy due to customised dressing wheel development
Highlights
Customer benefits
- Tool and workpiece protection
- Optimized tool process
- Monitoring of the radial and axial spindle load depending on the actual pull-in force
Left: Parameterised input for the production of profiles; Right: Dialogue-guided contour dressing cycle
In-Machine Tool Balancing
- Balancing of tools in the machine for high surface requirements and machine protection
- Checking the balancing quality of the spindle
- Balancing quality up to 0.3 g/mm
Highlights
Customer benefits
User Interface
- Better surfaces due to balancing of the entire system in the clamped state
- Balancing of the tool under machining conditions (machining position -vertical / horizontal, with / without internal cooling supply, speed)
- Economical, as no external balancing device is required
Left: Measurement result with balancing outside the machine - 3 [g]; Right: Measurement result after balancing in the machine - 0.3 [g]
MPC 2.0 – Machine Protection Control
- Vibration monitoring in the process
- Rapid shutdown in case of a crash
- Manual retraction even in swiveled machining plane
- NEW: Torque monitoring
- New: Recommended with Protection Package for CTX TC machines
Highlights
Customer Benefits
MPC Graph: aktuelle und angelernte Prozesswerte. / MPC Diagnostics: Lagerzustand, Anzahl von Stoß und Crash.
- Avoiding tool breakage
- Increase in machine availability
- Damage reduction
DMG MORI gearMILL
- Productive complete processing
- Cost-effective gear cutting on standard machine with standard tools
- Flexible for different gear geometries
- Quality inspection in the process
Highlights
Customer Benefits
- Program creation based on blank drawings and gear data
- Optimization of workpiece orientation e.g. after heat treatment
- Interface for coordinate measuring device (Klingenberg, Leitz, Zeiss)
Left : Input of the gear parameters for the geometry calculation of a spur gear. / Right : Grafische Betrachtung des Abwälzverfahrens.
3D quickSET
Turning
- Measurement and correction of the position of turning and Pivot axes (C4, C3, B)
- Sag compensation possible
- Can be used in combination with standard probes from customers (recommended Renishaw, Blum)
Milling
- Toolkit for checking and correcting the kinematic accuracy of 4- and 5-axis machine configuration
- All head variations and table axes
Highlights
Turning Customer Benefits
- Reliable re-calibration of the machine before a highly precise processing
- Continuous documentation of machine accuracy
- No rejected parts due to unknown Geometric-deviations
Dialogue-guided measurement of the B- and C-axis.
Milling Customer Benefits
- Periodic recalibration of the machine with comprehensive documentation
- Highest kinematic accuracy in self-regulation
Define kinematics head
Interpolation turning 2.0 – turning recessing cycle
- With interpolation turning, the tool cutter follows a circular movement, where the cutter is always oriented towards the center Of the circle.
- Possible for external and internal machining
- Synchronization and tool path controlled by the cycle
- NEW: in version 2.0 complex turning contours are possible (currently only available on the DMU 50, other machine types will follow)
Highlights
Customer benefits
- Easy manufacturing of sealing surfaces where milling operation might not be possible.
- Complete component processing in one clamping possible
- Reduced investment costs for tools
Application Tuning Cycle
- Process-oriented adjustment of the feed rate n relation to the table loading
- Minimization of machining time with maximization of the component quality
- NEW: Now also available for CTX TC. Ideal machining result with the highest machine dynamics*
*without consideration of feed weight
Highlights
Customer Benefits
- User friendly setting of the machine dynamics with included DMG MORI knowhow
- Time saving in roughing
- High surface finish during finishing
Left : ATC 2.0 – Milling: Consideration of table loading. / Right : ATC – Turning: for CTX TC for easy adjustment of the machine dynamics.
Service & training
Downloads & Technical Data
Workpiece
Max. workpiece length
738.2 in.
Max. workpiece width
118.1 in.
Max. workpiece diameter
126 in.
Max. workpiece height
98.4 in.
Max. workpiece weight
176369.8 lbs.
Max. workpiece weight (Type FD)
77161.8 lbs.
Clearance
Max. X-axis travel
738.2 in.
Max. X-axis travel (Type FD)
236.2 in.
Max. Y-axis travel
189 in.
Max. Z-axis travel
137.8 in.