LASERTEC 30 DUAL SLM

Additive Manufacturing by selective laser melting (SLM)

Build volume X
11.8 in.
Build volume Y
11.8 in.
Build volume Z
11.8 in.
Min. Layer thickness
0.0008 in.
Min. Focus diameter
0.002 in.
Laser power standard
600 W
Control & software alternatives
CELOS/RDesigner
Highlights

LASERTEC 30 DUAL SLM

Additive Manufacturing by selective laser melting (SLM) in powder bed

  • Highly complex components with function integration
  • Internal close-contoured cooling channels
  • Weight optimisation due to lattice and honeycomb structures as well as topology-optimised components
  • Simultaneous build-up of different designs
  • Functional prototypes made of series materials 

Additive Manufacturing with a 11.8 x 11.8 x 11.8 in. (X / Y / Z) building volume

  • High precision building of 3D parts with dynamic adjustment of the focus diameter (1.8 µin - 5.1 µin) and layer thicknesses between 0.5 µin and 2.5 µin for maximum productivity
  • Application-specific fibre laser sources from 600 W as standard to 1.3 hp. optional
  • Optimised shield gas volume flow for highest component quality with minimum Argon consumption < 19 gl / hour
  • Open system: Individual adjustment of all machine settings and process parameters as well as unrestricted selection of the material supplier
  • End-to-end competence with integral process understanding from drawing to finished part: DMG MORI Process Chains for pre- and post-processing of additively built parts

rePLUG – The powder module for fast material change

  • Automated powder handling: Integrated powder-recycling for maximum efficiency and highest work-safety due to closed material cycle 
  • One material per rePLUG – Any expansion of the material range due to modular changing system
  • Contamination-free change between different materials in <2 hours
  • High process autonomy due to powerful duo filter system (filter change without process interruption) as well as large powder reservoir (no manual refilling required in the process)
  • Optional: rePLUG RESEARCH The additional powder module, especially developed for the material and process parameter development on the series system 

LASERTEC SLM: Additive Manufacturing

Sample applications
Control & software
OPTOMET

NEW: OPTOMET - First time right Parameter Optimization Software

  • Expert knowledge at your finger tips - Parameter development for NEW materials within minutes
  • 20% less material costs - Increased usage of recycled powder without any loss of quality 

  • Fully adaptable material properties and layer thicknesses 

  • rePLUG reSEARCH and OPTOMET - The combination for material development 

CELOS: Consistent software solution from CAM programming up to machine control

  • Intuitive machine operation due to touchscreen and APP-based control
  • RDesigner: CAM Programming directly on the machine control
  • HEAT-Calculation: Patented advance calculation of mass distribution and automatical adjustment of all laser parameters for top component quality
  • Monitoring tools: Camera-based process monitoring of the build-up and coating quality

OPTOMET - First time right

Service & training
Downloads & Technical Data
Technical Data
Build volume X
11.8 in.
Build volume Y
11.8 in.
Build volume Z
11.8 in.
Min. Layer thickness
0.0008 in.
Max. Layer thickness
0.0039 in.
Min. Focus diameter
0.002 in.
Max. Focus diameter
0.0118 in.
Laser power standard
600 W
Laser power optional
1000 W
Inert gas
Argon
Inert gas consumption
150 l/h