- Dynamics: 0.5 g acceleration and 1,968.5 in/min rapid traverse (X/Y/Z)
- Large work area: Travel paths of 78.7 × 78.7 × 47.2 in. (X/Y/Z), optionally 157.5 in. travel path in X, at 258.3 ft² footprint
- High stability: Cast iron machine bed
- High table load: Workpieces up to 22,046 lbs
- High degree of flexibility: 45° or 90° milling head for 5-axis machining with up to 30,000 rpm
- Technology integration: Optional integration of ULTRASONIC for the CFRP/GRP machining or LASERTEC Shape for surface texturing
The DMU 200 Gantry from DMG MORI impressively combines the machining of large components and maximum dynamics. Users benefit in the aerospace and automotive industry as well as in model making and the energy sector. With the 5-axis machining of up to 30,000 rpm and optional ULTRASONIC or LASERTEC technology integration, more complex components weighing up to 22,046 lbs made of aluminium or composites as well as welded components can be machined economically. The machine can be easily loaded from the top with a crane. The low gantry design of the DMU 200 Gantry enables optimum utilization of the work area. With a footprint of no more than 169.3 x 212.6 inches, the machine achieves travel paths of 78.7 x 78.7 x 47.2 inches, with which DMG MORI is successfully complementing its product range between the DMF and the DMU P series. “The ratio of the large work area of 6.6 x 6.6 inches to less than 258.3 ft² footprint has also inspired our customers – even surprised them,” says Markus Rehm, Managing Director of DECKEL MAHO Seebach GmbH. They could already see this for themselves in July this year at DECKEL MAHO in Seebach, Rehm continues, and emphasizes: “The DMU 200 Gantry is the ideal complement of the product portfolio for the machining of large components at the Seebach location.”
The combination of cast iron machine bed and gantry portal creates a solid basis for the high dynamics. With rapid traverses of up to 1,968.5 in/min and 0.5 g acceleration, large components can be machined efficiently. Depending on the field of application, two milling heads are available for 5-axis simultaneous machining, a 45 ° as well as a 90 ° milling head. The first one enables the best possible utilization of the work area, while the 90 ° milling head enables the use of application-specific spindles, including the compactMASTER with a rotational speed of 20,000 rpm as standard in the 5-axis version. Additional spindle options comprise rotational speeds of 24,000 rpm, 28,000 rpm and 30,000 rpm. The vertical 3-axis version of the DMU 200 Gantry is equipped ex works with a speedMASTER spindle with 20,000 rpm. Adding to this is the optional ULTRASONIC milling head as well as the LASERTEC Shape Technology. This technology can be used to completely machine molded parts including surface structuring.